External Temperature Monitoring Sensor Probe

External Temperature Sensor Probe for the SensorGateway

Requires the SensorGateway
The external temperature probe adds an additional monitoring point to the SensorGateway. For example by using 2 external temperature probes you can monitor with one single device temperature in 3 different points.

It can monitor temperature in degrees Celsius or Fahrenheit within a range of -55°C to +75°C (-67ºF to +167ºF). It has a precision of ±0.1ºC (0.18ºF) with an accuracy of ±0.5°C (0.9°F) from -10°C to +85°C (-14°F to 185°C).

The probe connects via the shipped RJ45 cable to the SensorGateway on the Probe 1 or Probe 2 port. It can alert you autonomously through email or SNMP Traps. Need SMS alerting? Then this is possible by using the ServersCheck Monitoring Software/Appliance which monitors centrally all different sensors running in your network.


  

Temperature Sensor Probe
Temperature Resolution: 0.1°C (0.18)°F precision
Temperature Accuracy: +/- 0.5ºC (+/- 0.9 ºF) over 0ºC to +60ºC
Readings in Celsius or Fahrenheit
Operating temperature range: 0ºC to +75ºC (32ºF to +167ºF) in PoE mode
Operating humidity range: < 90% rH (non-condensating)
Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8")
Housing: Orange metal case with status led
0U Rack mountable
Connects via included 50cm/1.6ft regular RJ45 cable to SensorGateway (up to 10m/33ft supported between probe and SensorGateway)
The probe requires the SensorGateway to operate